-
Server/Network enclosure
Static load capacity 1300KG
78% ventilation rate door to match the requirement of high airflow
Pre-installed wheels, easy to move
Levelling feet can be adjusted from the top by screwdriver
Multi functions roof panel with large cable entries
Easy to bay each other
Tool-free PDU installation
Mounts of tool-free installation accessories
Easy to adjust depth of mounting angles
On top cable management systems
Ready for on top power bus bar systems¥ 0.00More>
-
Side Panel
Divided into 2 pieces, easy to be handled and installed, each piece can be locked individually.
For complete installation, 2 packs needed.
- Color: RAL9005¥ 0.00More>
-
Component Shelf
For static installation between two 482.6 mm (19") mounting levels.
- Depth-variable to adapt to individual distances between levels
- Tool-free, easy to assembly
- Color: RAL9005¥ 0.00More>
-
Cable Duct
High packing density due to U-based cable routing
Removable duct covers hinged on both sides
Easily installed with tool-free fast assembly on the front and rear 482.6 mm (19") mounting angles
Material: Sheet steel; Plastic, UL 94-V0
Color: RAL9005¥ 0.00More>
-
Aisle Containment
Aisle containments isolate cold air from hot air in datacenters, this makes cold air can only pass through IT devices and cool them down.
This facility helps to reduce hot spots in datacenters and improve the cooling efficiency.¥ 0.00More>
-
Industrial Enclosures
Height: 2200mm, depth: 500mm
Height: 2200mm, depth: 600mm¥ 0.00More>
-
Industrial Enclosures
IP66 protection to IEC 60 529
Color: RAL 7035
Enclosure, door: Sheet steel 1.5mm
Mounting Plates: Sheet steel 2.5mm¥ 0.00More>
-
Inline Cooling Unit
Inline cooling units can be installed with server racks together, blowing cold air into cold aisle horizontally. They can be applied to racks with a heat density from 5KW to 20KW.
Both CW and DX version are available to match different applications.¥ 0.00More>
-
Basement Cooling Unit
Innovative under-floor cooling units help to save space in datacenters, there are no footprints of cooling systems. Heat exchangers are right below the server racks, fans are installed in front of server racks, and a vented grids on top of fan instead of floor block. In the hot aisle, the floor blocks are also replaced by vented grid, so that hot air can be exhaused.¥ 0.00More>